Admin
 الجنس : 
عدد المساهمات : 124
تاريخ التسجيل : 03/04/2012
المزاج : مشغول
 |  موضوع: صور لجميع لوحات التحكم فى CNC Panels and Pendants الجمعة يوليو 13, 2012 10:18 pm | |
|  Here's a real nice panel I ran across. Not sure if this fellow made this panel or bought it.  Haas CNC machining center. Functions include (roughly top to bottom left to right):- Power on/off- Spindle load meter- Emergency Stop- MPG- Cycle Start + Feed Hold Buttons- Setup keypad for establishing tool #'s and offsets- Auger, coolant, and jogging keypad-
Overrides for feed rate, spindle speed, spindle direction, and rapids
speed (makes you wonder if you want the MPG's to run at either the
feedrate or the rapids rate?)- Mode commands (e.g. load CNC program, edit, manual programs, zero/home, and memory contents)- Numeric keypad (no alpha keypad!)  Very simple panel:- Touchscreen (of course you can do a lot with one of these!)- Cycle Start, Feed Hold, E-Stop- Key Lock- Alpha Keyboard (touch panel eliminates need for a mouse)   Homemade Panel for Mach:- Non-Touch LCD (use the trackball)- MPG- E-Stop- Can't read the buttons and LEDs- Alpha Keyboard- Trackball (LED's below are unknown- 2 Joysticks. I assume these are for fast slewing.Check the guy's CNC machined arm for mounting this thing!  Homemade Bridgeport CNC Retrofit:- E-Stop- PC Start (e.g. Power)- Key emulator button pad is used to call special functions in Mach.- Spindle speed pot with RPM and Load LCD's (nice!)- For stepping the CNC program he has Cycle Start, Optional Stop, Single Block, and Feed Hold- Coolant: Force off, flood, mist, or let Mach control it with "Auto"- Feed override: You see this one more than spindle override on "pro" systems.- X, Y, Z, A Joysticks- The 3rd Joystick has two momentary positions: left raises the z for toolchange and right is all axis home.- Limit Override Button- Spindle CCW, Off, Auto (under Mach Control), and CW- Start up button (for the PC)- Alpha keyboard. - There is also a separate IR keyboard and mouse as well as a pendant. Centroid Lathe Panel:
- LCD screen
- MPG selector and rate controls
-
For controlling the CNC program he has Cycle Cancel, Cycle Start, Feed
Hold, Single Block, and Tool Check (Does Mach have a Tool Check
function?)
- Feedrate Override
- Coolant and Spindle Controls
- Tailstock
- Spindle Override
- Alpha Keyboard
- E-Stop Matsura CNC Mill:
- E-Stop
- Power
- ATC?
- Display
- Alpha Keyboard (Better layout for g-codes?)
- Manual SubPanel with MPG
- Auto Sub Panel w/ Feedrate and other overrides
- Spindle Monitoring w/ Overrides
- Coolant
- Key Lock Nice Homebrew Panel:- LCD Panel with "Soft Switches" to right and left that line up with buttons on the screen.- E-Stop/Reset for Mach- CNC Program Control including Cycle Start, Cycle Stop, Pause (Tool Check?), Single Block, Optional Stop, and Block ???- Feedrate and Spindle Overrides (Yes!)- Jog Subpanel with an MPG, Fast Jog push buttons, Axis Select, Jog Mode, and Jog Increment controls.- E-Stop (electrical, not just Mach)- Machine Coordinate Commands: Search Reference, Goto Home, Goto Tool Change Pos- Coolant Controls: Flood, Mist, Off- Spindle Controls: CW, CCW, Off  An Electronic Leadscrew Panel:- Display with DRO, Spindle RPM/Load, Feed Speeds, and Thread Settings- E-Stop- Rapid Retract Function- Spindle Direction- Spindle Speed  SoftServo
panel relies heavily on the soft keys along the right and bottom edges
of the screen. You could certainly lay out Mach screens to make this a
very workable design.  Homemade Mill Panel:- LCD Screen- Manual Spindle Controls- E-Stop- Automation Direct VFD Remote Control- MPG- ASCII Keyboard- X, Y, Z, A Joysticks for Jogging- X-Keys 20 button cluster with: Green/Red Layer, Jog Mode, Jog Inc, Start/Rewind/Stop, MPG, MPG Axis, 4 Arrow Keys Ultimax Lathe Panel:- LCD Touch Screen- Power On/Off- Start Cycle, Feed Hold- E-Stop- Feed & Spindle Overrides- MPG with axis select and rates (same on pendant)- Cycle Mode, Test Run, Coolant Controls- Keypad and Jogging arrows Ultimax Mill Panel:- LCD Touch Panels, 1 for commands and DROs, one for toolpath- Feed & Spindle Overrides- Power On, Feed Hold, Start Cycle- Key Lock- Step Cycle, Coolant, Tool Select- Pendant- Numeric Keypad w/ Jog Arrows- E-Stop- Trackball Fanuc Panel:- LCD Display w/ Soft Buttons along right and bottom- E-Stop- Key Lock- Spindle & Feed Overrides- Power On Off- Alpha Keyboard- Modes- Cycle Start/Stop- Jog- Rapids- Spindle This one is a little harder to see, but you can make out the usual basic controls plus a waterproof keyboard and monitor.  CNC Auto Panel:- E-Stop- Removeable Pendant with Axis, Rate, and MPG- LCD Display- Cycle Sart, Feed Hold, Single Block- Feedrate Override- Manual Spindle Direction- Spindle Override- Coolant- Brake- Alpha Keyboard
عدل سابقا من قبل Admin في السبت يوليو 14, 2012 9:33 pm عدل 2 مرات | |
|
Admin
الجنس :
عدد المساهمات : 124
تاريخ التسجيل : 03/04/2012
المزاج : مشغول
| | موضوع: رد: صور لجميع لوحات التحكم فى CNC Panels and Pendants الجمعة يوليو 13, 2012 10:19 pm | |
| Pendants
 Here is a serious pendant! Looks fatiguing to hold.  This pendant is based entirely on keyboard emulation.  Pure MPG pendant.  Great looking pendant from CNCMasters: - E-Stop - Feed and Spindle overrides - Fast jog joystick - MPG with axis selection  A nice large pendant | |
|
